Hammond Lumber Company has received two awards from the Northeast Lumber Manufacturers Association (NeLMA) for outstanding safety performance in 2013 at its sawmill and planer mill in Belgrade. The awards are given to mills operating in the New England states, plus New York and Pennsylvania.

A Maine family-owned business founded in 1953, Hammond finished first in Division 1 for its sawmill, and first in Division 2 for the combined operations of both mills.

Perhaps best known today as a building supplier operating 13 retail stores throughout Maine, Hammond Lumber began as a three-man sawmill, which is still housed at its original location in Belgrade. In its 61 years of continuous operation, the Hammond mill has seldom had a lost-time accident and has won many safety awards.

According to safety director Bruce Pelletier, there has not been a lost-time accident in the sawmill since 2004, nor in the planer mill since 2001.

A safety committee established in 1985 continues to meet once a month to identify and correct potential safety hazards on the job as well as to discuss ideas for keeping everyone in the company safe during their off-hours, too. The position of full-time safety director was created in 2005 and has been filled by Pelletier ever since.

There are currently 11 people working in the sawmill, and six in the planer mill, representing a total of 223 years of experience at Hammond. Gerald Manley has worked for the company for 35 years, Craig Dawes for 34, Cliff Elliott for 29, and Rob Higgins for 20. Richard Thyng, Mark Carlow and Alan Bickford have all been on the job more than 15 years. Travis Manley has 14 years in.

Those with three to 10 years are brothers Ron and Bruce Albair, Coyt Ingraham, Chris Hinkl, Frank Walker and Matt Dawes. Newcomers since the 2013 award period ended are Nathan Hewett, Joshua Ladd and Tony Bellavance.

Travis Manley is Gerald’s son, and Matt Dawes is Craig Dawes’ son. Craig’s father, Ken, retired from Hammond in 2002 after 15 years with the company.

In addition to its safety record, the Hammond sawmill has been recognized for its “whole log” approach to milling. Nothing from the log goes to waste. The bark becomes mulch, and both sawdust and shavings are used as bedding for farm animals. The ends of the boards are used for crafts, for kindling, and for fuel to run biomass generators. The “slabwood” pieces or “edgings” from the log are fed into a chipper, and the resulting chips are used to make paper. The core log may then be used for Maine Pine Log Homes, Hammond’s line of building packages, or it may be further milled into dimensional lumber.

“It’s important to us not to waste anything,” Donald Hammond said. “There are only so many trees, so we don’t want to use more than we need to. Selective cutting is practiced on most of the lots from which the company buys logs, and many of these lots are now in their third cutting. The result is sustained yield from the same acreage.

“In fact,” Hammond said, “even though the production volume of our mill has increased quite a bit over the years, the number of acres harvested has increased very little. You could say it’s as important to us to keep our resource safe as it is to keep our people safe. We depend on both.”

Further information about Hammond Lumber Company is available at www.hammondlumber.com.